PRICE LIST

Castings are supplied unpainted unless otherwise stated in the description.


HO (3.5mm scale) Range

Ref No

Description

Price

HO-001

Sanding tower kit – delivery pipe one side only. Produced to order only. Contact us for availability.

£8.00

HO-002

Sanding tower kit – delivery pipe both sides. Produced to order only. Contact us for availability.

£10.00

HO-005

Wooden water tank kit. Suitable for roof mounting or standing on the ground. The model can easily be adapted to many uses, e.g. narrow gauge locomotive watering tower. Supplied as a kit of parts, the tank has a diameter of 30mm and the top of the frame stands 72mm using the legs supplied.

£5.50

HO-006

Small shack kit. A small, timber-built shack similar to those found in woodlands all over America, generally used as hunting and fishing cabins. The model is supplied as a kit of parts and requires the use of a craft knife, small files or fine sandpaper, and glue to assemble. The finished shack is 64mm long, 30mm wide and 38mm high to the ridge of the roof.

£4.75

HO-006P

Small shack. As above, ready made and painted.

£7.25

HO-007

Building remains 1. Paint and glue the castings to the wall of a building to give the impression that a neighbouring building has been demolished. Paint the area bounded by the castings a different colour to the rest of the wall for added effect.

£2.00

HO-008

Log cabin 1. A small log cabin such as is commonly used for hunting and having a stone chimney breast and shingled roof. The model consists of a single casting for the walls and chimney, two castings for the roof and plastic rod to make the ridge.

£5.00

HO-008P

Log cabin 1. As above but ready made and painted.

£7.00

HO-009

Log cabin 2. A larger cabin with a covered veranda on the front. The model consists of a single casting for the walls and chimney, three castings for the roof and plastic rod to make the ridge and veranda roof supports.

£8.50

HO-009P

Log cabin 2. As above but ready made and painted.

£13.00

HO-010

Grade crossing 90 degree. A set of three castings to make a rural grade crossing. Designed for use with code 100 track, the castings can be thinned by sanding for use with finer scale track. The road is a scale 20 feet wide. The angle quoted is the angle between the line of the track and the line of the road. Left and right refer to the direction the road takes when looking towards the track.

£4.00

HO-011

Grade crossing 67.5 degree left. See description above.

£4.00

HO-012

Grade crossing 45 degree left. See description above.

£4.00

HO-013

Grade crossing 67.5 degree right. See description above.

£4.00

HO-014

Grade crossing 45 degree right. See description above.

£4.00

HO-015

Lockers – as found in changing rooms. Dimensions are 15mm wide x 21mm high x 6mm deep. Each pack contains two units.

£2.00

HO-017

40 cu ft gas tank. A domestic gas (propane) tank of the type used to feed heating systems.

£1.75

HO-017P

40 cu ft gas tank. As above but ready painted.

£2.50

HO-018

Yard Office. A small, flat-roofed building suitable for a variety of uses. The building measures 50mm long x 36mm wide x 31mm high and has a stuccoed finish.

£3.50

HO-018P

Yard office. As above but ready painted. If you require a particular colour finish, please email us before ordering.

£4.75

HO-020

Doors – personnel. A selection of 4 different doors, each 12mm wide x 24mm high. A small surrounding flange is included in the moulding to make them easy to install and allow firm gluing.

£2.00

HO-021

Weatherhood 1. Add an instant loading bay by painting and gluing the casting to a blank wall.

£2.00

HO-023

Louvered vents 1. A simple 2 scale-feet square vent to paint and stick onto a wall or window. Four per pack.

£2.00

HO-023P

Louvered vents 1. As above but ready painted in grey.

£2.75

HO-024

Louvered vents 2. A curved-cowled 2 scale-feet square vent to paint and stick onto a wall or window. Four per pack.

£2.00

HO-024P

Louvered vents 2. As above but ready painted in grey.

£2.75

HO-025

Roof access door. A common feature on many flat rooftops, allowing easy access for maintenance. Make your kit-built models individual with this easily added feature.

£2.75

HO-025P

Roof access door. As above, but ready painted.

£3.75

HO-026

Roof access hatch. A hatch allows access to the rooftop for maintenance purposes. These units are supplied in packs containing three units.

£2.00

HO-026P

Roof access hatch. As above, but ready painted.

£2.50

HO-027

Roof ducting kit. Construct your own configuration of rooftop ducting with this kit of parts. The ducting is 4.8mm square and the ends have slots and tabs for easy alignment. The kit includes 30 pieces, vis: 10 x Straight section (Part A), 2 x 90 degree Curved section (Part B), 2 x 90 degree Curved section (Part C), 2 x 45 degree Angled section (Part D), 2 x 45 degree Angled section (Part E), 4 x Air inlet/outlet stack (Part F), 4 x 90 degree joint (Part G) and 4 x Through-roof connector (Part H).

£5.50

HO-028

Roof-lights. Small double-pitched, glazed roof-light unit. Two per pack.

£2.40

HO-028P

Roof-lights. As above, but ready painted.

£3.40

HO-029

Ducting straights (5). Straight pieces of our rooftop ducting, each representing five straight pieces joined end to end, to aid making long straight runs. The length of each piece is 100mm long. Matches our other standard (4.8mm square) ducting. Three per pack.

£3.00

HO-030

Ducting straights (3). Straight pieces of our rooftop ducting, each represents three straight pieces joined end to end, to aid making long straight runs. The length of each piece is 60mm long. Matches our other standard (4.8mm square) ducting. Three per pack.

£2.00

HO-031

Ducting elbows (90). A pack of four 90 degree bends (2 left hand and 2 right hand) which match our standard (4.8mm square) ducting.

£1.75

HO-032

Ducting hatch. A 20mm straight ducting section which includes an inspection hatch. As a general rule, inspection hatches are placed close to any point where the ducting passes through a roof. Supplied as a pack of four units.

£1.75

HO-033

Ducting vent. A different style of vent to those supplied in the ducting kit. These require the cowls gluing in place on the uprights prior to painting. The uprights include an inspection hatch for maintenance of the filter. Supplied in a pack of four units.

£1.75

HO-034

Chimney pack 1. A selection of four different brick-built chimney stacks to customise your rooftops. The stacks are a little over a scale 6 feet tall and can easily be cut to match any roof slope, or used as they are on a flat roof.

£2.50

HO-034P

Chimney pack 1. As above but ready assembled and painted.

£4.00

HO-035

Square mushroom vents. Pack of four square mushroom style vents, with access hatch detail on the column, to detail your rooftops.

£2.00

HO-036

Roof vent 2. A pack of three swan-neck style roof vents. They stand 20mm high and have a 7mm square cross-section.

£2.50

HO-036P

Roof vent 2. As above but ready painted in a silver finish.

£3.50

HO-037

Roof block house. A useful utility style building that can represent an air conditioning house or a elevator shaft house on top of a building, or find many other uses at ground level. The model is 31mm high with a 35mm square base.

£3.00

HO-037P

Roof block house. As above but ready painted.

£4.25

HO-038

A/c unit large. A large domestic air- conditioning unit as fitted in window openings. Dimensions 9mm wide x 7mm high x 6.5mm deep. Each pack contains 4 units.

£2.00

HO-038P

A/c unit large. As above, but ready painted.

£3.00

HO-039

A/c unit small. A small, domestic style air conditioner unit as fitted in window openings. Similar in style to our larger units but for narrower windows. Dimensions are 6mm wide x 6.5mm high x 6.5mm deep. This product is supplied in packs of 4.

£2.00

HO-039P

A/c unit small. As above, but ready painted.

£3.00

HO-040

Battery house 1. A common sight alongside railroad tracks and yards. Usually having a galvanized finish. Dimensions 20mm wide x 15mm deep x 31mm high. Supplied as a single casting.

£2.20

HO-040P

Battery house 1. As above, but ready painted.

£3.00

HO-041

Battery house 2. A larger battery house based on the one which stood by the old passenger depot in Parkersburg, West Virginia. This model requires some very simple assembly of the five parts (base, body, roof and vent tops) in the kit using a craft knife and glue. Assembly instructions are provided.

£3.20

HO-041P

Battery house 2. As above, but ready made and painted.

£6.00

HO-042

Battery house 3. A common sight alongside railroad tracks and yards the model is based on an original seen beside a grade crossing on the CSX line, alongside Route 7 south of Parkersburg, West Virginia. These buildings usually have a galvanized finish, though this will tarnish to grey with age. The roof is a separate casting and requires gluing in position. Dimensions are 21mm wide x 21mm deep x 30mm high.

£2.75

HO-042P

Battery house 3. As above, but ready made and painted.

£3.25

HO-043

Roof vent 4. A style of vent having a conical centre within a 5mm deep ring and mounted on an 8mm high square base, with concave sides which taper out to a wide foot. The vents stand 15mm high and are supplied as two top and two base castings per pack.

£1.75

HO-044

Culvert 4.A 3-piece cast concrete style culvert with twin 12mm portals. The side retaining walls can be set at any angle you require by simply filing an angle on them before assembly.

£2.50

HO-045

Culvert 1. A cast concrete style water culvert ready to build into your scenery. The model is 53mm wide, stands 32mm high and has a pipe diameter of 12mm.

£2.50

HO-045P

Culvert 1. As above, but ready painted.

£3.50

HO-046

Chimney bracket. A simple bracket with an inspection hatch and a recess to take an 8mm diameter tube to form the chimney. Supplied in packs of two units.

£1.75

HO-047

Relay cabinet 1. A relay cabinet based on one found on the Fonda Johnstown & Gloversville RR. The model has door detail on both of the large sides and measures 28mm high, 29mm wide, and 8mm deep.

£2.00

HO-047P

Relay cabinet 1. As above, but ready painted.

£3.00

HO-048

Fans 1. A pack of five fans which can be used to customize the walls of your industrial buildings by simply painting them and gluing them in place. The models measure approximately 11mm square and 2mm thick.

£2.00

HO-049

Fans 2. A second style of fans, otherwise as HO-048 above.

£2.00

HO-050

Cribbing. A section of timber cribbing 68mm long and 28mm high. Cribbing is often used to support trackbed or roads. Sections can be arranged end to end to create long embankments, or one on top of another (with minor modification, i.e. removing the top timber of the lower units) to form taller embankments.

£2.00

HO-050P

Cribbing. As above, but ready painted.

£3.50

HO-051

Fans 3. A third style of fans, otherwise as HO-048 above.

£2.00

HO-052

Fans - Mixed. Two of each of our HO- 048, HO-049, and HO-051 style fans (Six in all) for those who require a selection.

£2.25

HO-053

Steps 1. A short flight of "concrete" steps suitable for access to a raised loading dock for example, though we're sure they will find many other applications. The steps are 13mm high and are supplied three units per pack.

£2.00

HO-054

Road safety barriers. A model of the concrete sectional safety barrier used to protect many things from impact by road vehicles. The models have the correct angles to the base and the barrier itself, and simulated connecting tabs on the ends. Each section is 45mm long overall. Five sections per pack.

£2.20

HO-055

Garden shed 1. A barn style garden shed, a style very popular in America. This is the taller variety, measuring a scale six feet to the eaves and ten feet high, and having a base a scale eight feet square.

£2.50

HO-055P

Garden shed 1. As above, but ready painted.

£4.00

HO-056

Garden shed 2. A barn style garden shed, a style very popular in America. This is the smaller variety, measuring a scale four feet to the eaves and eight feet high, and having a base a scale eight feet square.

£2.00

HO-056P

Garden shed 2. As above, but ready painted.

£3.50

HO-057

Garden shed 3. A ribbed panel type garden shed of a style very popular in America having twin sliding doors. The model measures a scale five feet to the eaves and six feet high to the ridge of the roof. The base has a scale width of ten feet and a scale length of eight feet.

£2.20

HO-057P

Garden shed 3. As above, but ready painted.

£3.50

HO-058

Relay cabinet 2. A model of a small electrical relay cabinet. The model is based on one found beside a railroad crossing barrier alongside Route 7 in West Virginia. The models measure 13mm wide x 5mm deep x 14mm high and are supplied 2 per pack.

£2.00

HO-058P

Relay cabinet 2. As above, but ready painted.

£3.00

HO-059

Culvert 2. A slope fronted culvert with a 12mm diameter, circular, corrugated pipe. Similar culverts are often used to channel water under a roadway or railroad track bed. The model is 48mm long and 20mm square in cross-section with a slope of 30 degrees on the front face.

£2.20

HO-060

Culvert 3. A small cast concrete style culvert with a 6mm bore and angled side retaining walls. Each pack contains two castings.

£2.20

HO-061

Outhouse 1. The outhouse can still be found in yards in many rural areas of America. This model is of a timber built single-seater with a single pitch roof. The model is supplied as a single resin casting with card to form the roof.

£1.75

HO-061P

Outhouse 1. As above, but ready made and painted.

£2.75

HO-062

Outhouse 2. The outhouse can still be found in yards in many rural areas of America. This second model in our range of outhouses is of a timber built single-seater with a double pitched roof. The model is supplied as a single resin casting with card to form the roof.

£1.75

HO-062P

Outhouse 2. As above, but ready made and painted.

£2.75

HO-063

Outhouse 3. The outhouse can still be found in yards in many rural areas of America. This third model in our range of outhouses is of a timber built two-seater with a single pitched roof. The model is supplied as a single resin casting with card to form the roof.

£2.00

HO-063P

Outhouse 3. As above, but ready made and painted.

£3.00

HO-064

Outhouses pack 1. The outhouse can still be found in yards in many rural areas of America. This pack contains one of each of our first three models in this range, two single-seaters and a double-seater. The models are supplied as three resin castings, with card to form the roofs.

£4.00

HO-064P

Outhouse pack 1. As above, but ready made and painted.

£7.00

HO-065

Mail boxes. This pack contains a selection of seven different US style mail boxes and five gallows-style stands. The models are very small.

£2.00

HO-066P

Push mower - painted. A single model of a motorised push mower supplied ready assembled and painted.

£2.50

HO-067

Small storage tank. The model measures 1.25 inches long by 0.5 inches high and 0.25 inches wide. The top and bottom are rounded. Supplied with two small support stands.

£2.20

HO-067P

Small storage tank. As above but ready painted and weathered.

£3.50

HO-068

Roof vent 3. A circular, modern style of vent that is 18mm in diameter with a domed centre and standing on a square base. Supplied in packs of two units.

£2.40

HO-068P

Roof vent 3. As above but supplied ready painted with a silvery finish.

£3.40

HO-069

Roof light 2. A larger roof light than our HO-028 model being 24mm long by 19mm wide by 10mm high with three windows per side. Supplied in packs of 2 units.

£2.75

HO-069P

Roof light 2. As above but supplied ready painted.

£4.00

HO-070

Dummy switch motor. A model of the Union Switch & Signal Company pneumatic switch motor and valve unit as used on many American railroads. Supplied as two units (Each unit consists of dummy motor plus valve unit) per pack. A diagram showing the pipework arrangement is included.

£1.50

HO-071

Dummy switch motor – five-pack. As above but with five units. NB: Greater quantities can be supplied at further discount. Please contact us with your requirements for a price quote.

£3.50

HO-075

Trackside ducting 1. Six sections, each 80mm (3 1/8 inches) long, depicting the cast concrete cable ducting found alongside the tracks. The sections can easily be cut to form shorter lengths or to follow curves in your trackbed.

£2.00

HO-076

Trackside ducting 2. To complement our trackside cable ducting pack 1, this pack contains a section of capped ducting, a section of open ducting, a section of ducting lids, and two ducting junction pieces. Each section is 80mm (3 1/8 inches) long and is easily cut to form shorter lengths or to follow curves in your trackbed. The open ducting is modelled empty. Cables can be represented with fine wire.

£2.00

HO-077

Trackside ducting junctions. A pack of four triangular junction pieces to complement the above.

£1.75

HO-080

Railroad phone booth 1. A model of a pre-cast concrete rail-side telephone booth styled after one on the ATSF at Novice, Texas.

£2.40

HO-080P

Railroad phone booth 1. As above but ready painted.

£3.40

HO-081

Railroad phone booth 2. A model of a timber-built rail-side phone booth with a shingled roof similar to one found on the ATSF at San Antonio, New Mexico.

£2.75

HO-081P

Railroad phone booth 2. As above but ready painted.

£4.00

HO-082

Relay cabinet 3. A modern, metal style cabinet with doors front and rear. The models are supplied two in a pack.

£2.40

HO-082P

Relay cabinet 3. As above but supplied ready painted in grey.

£3.40

HO-085

Roof vent 5. An exhaust style roof vent with a louvered and angled outlet. Two per pack.

£2.00

HO-086

Rooflight 3. Measuring 18mm wide by 23mm long and 15mm high at the rear sloping down to 8mm high at the front this model is supplied in packs of two castings.

£2.75

HO-086P

Rooflight 3. As above but supplied ready painted. If a particular colour is required, please specify when placing the order.

£4.00

HO-087

Roof vent 8. A 16mm dia. cylindrical vent having a conical centre, a splash guard beneath, and a 28mm high base which tapers from being 11mm diameter to 11mm square over the top 15mm. The base is left long to facilitate holding in a vice whilst cutting to the slope of the roof on which it is to fit. It is also separate from the top portion so that the detail on the latter does not get damaged during cutting. Supplied two per pack.

£2.20

HO-088

Steps 2. A pack of two castings, each of a flight of steps which, with a length of 52mm, provide a rise of 39mm at 45 degrees. The models are of the treads only, with nothing below.

£2.00

HO-090

Building front 1. A low-relief model of a modern industrial unit having a block lower wall and pressed-metal upper, with a pitched roof and a personnel door to the right of centre. The model is 92mm wide by 75mm high and 5mm deep.

£3.00

HO-091

Building front 2. A low-relief model of a modern industrial pressed-metal unit having with a north-light style roof and personnel door to the left of centre. The model is 111mm wide by 93mm high and 5mm deep.

£3.20

HO-092

Building front 3. A low-relief model of a modern industrial unit having a block lower wall and pressed-metal upper, with a pitched roof, personnel door and vehicle access door.

£3.00

HO-093

Building front 4. A low-relief model of a larger modern industrial unit with a pressed-metal upper with a pitched roof and is supplied with a separate 6.5mm deep block lower wall. A 50mm deep block wall is available separately as HO-123. Loading and personnel doors are also available separately (See HO-096 and OO-096) and can be positioned as required. The unit (including the wall) is 151.5mm high to the ridge, 124mm to the eaves, and 150mm wide.

£4.50

HO-094

Building sides 4-149. A wall section to match our HO-093 and HO-120 building fronts. The section has a rebate behind the top edge to take roofing material. Also supplied are edge strips for use if the wall is to be used on its own as a low-relief unit.

£4.50

HO-095

Building sides 1-20. A set of castings providing a base, walls and roof sections to give our Building fronts HO-090, HO-092 and HO-132 models a depth of 25mm front to back thus creating greater relief. The sides are plain, i.e. no doors or windows.

£3.00

HO-096

Doors 2. Castings of a vehicle entrance door and a personnel door which can be simply painted and stuck to the outside of a building. The vehicle door is 42mm wide and 42mm high and the personnel door is 13mm wide and 24mm high.

£2.00

HO-097

Building front 5. A low relief model with a single slope roof which has been designed to be used to extend our HO-093 or HO-120 models to the left, as viewed, but which can also be used alone or with HO-098 or HO-122. Supplied with a separate 6.5mm deep block lower wall. A 50mm deep block wall is available separately as HO- 124. Loading and personnel doors are also available separately (See HO-096 and OO-096) and can be positioned as required. The model is 72mm wide 124mm high at the highest point and 100mm high to the eaves. These heights include the lower block wall.

£2.50

HO-098

Building front 6. As above but with the roof sloping the opposite way to extend HO-093 or HO-120 to the right as viewed.

£2.50

HO-099

Building sides 2-50. A kit to provide an additional 50mm front-to-rear depth to our HO-093 or HO-120 models. The kit consists of two wall sections, two roof sections, two 5mm deep block lower wall sections, and plastic rod to make the roof ridge.

£4.00

HO-100

Crates 1. A pack of three castings of wooden crates, one large crate 43mm long, 20mm wide and 8mm deep, and two crates 24mm long, 18mm wide and 14mm high.

£2.50

HO-100P

Crates 1. As above but supplied ready painted.

£3.50

HO-101

Crates 2. A pack of five castings of small wooden crates each being 10mm long, 7mm wide and 5mm high.

£1.50

HO-102P

Crates 3. Two castings representing single crates/boxes (Each 10mm long x 7mm wide x 6mm high), and one castings representing a stack of eight (2x2x2) of the same. Supplied ready painted.

£2.50

HO-105

Pulpwood stack 1. A stack of pulpwood approx 30mm long by 20mm wide by 15mm high for use as a wagon load or as a scenic item. Supplied in packs of 2 units.

£2.20

HO-105P

Pulpwood stack 1. As above but supplied ready painted.

£3.50

HO-106

Bethgon load. Two unpainted castings to represent mineral loads in Walthers bethgon freight cars.

£3.00

HO-106P

Bethgon load. As above but ready painted to represent coal loads.

£4.00

HO-107

Oil drums stacks. One stack of six 55- gallon drums (3 long by 2 wide) and one line of three drums.

£2.50

HO-107P

Oil drums stacks.As above but supplied ready painted in a variety of colours.

£4.00

HO-108

Oil drums open. Empty 55-gallon oil drums which can be used for a variety of purposes. Three per pack.

£1.75

HO-108P

Oil drums open. As above but supplied ready painted in a variety of colours.

£2.75

HO-109

Oil drums. Castings representing individual 55-gallon oil drums. Six per pack.

£1.75

HO-109P

Oil drums.Three castings of 55-gallon oil drums supplied ready painted in a variety of colours.

£2.75

HO-110

Industrial chimney 1. A sectional style of metal chimney which attaches to the wall of a building. The stack is 1146mm high (but may be cut down in size) and sits on a mounting bracket with a further small bracket to brace higher up the stack.

£3.00

HO-111

Industrial chimney 2. Similar to HO-110 but with a narrow top 48mm of stack.

£3.00

HO-115

Refrigeration unit 1. A refrigeration unit suitable for mounting on a rooftop or beside an industrial/retail premises where cool room facilities are required. The model is supplied as two castings, being the control panel and the heat exchange units. The model measures 32mm x 25mm x 23mm when assembled.

£2.20

HO-115P

Refrigeration unit 1. As above but ready assembled and painted.

£4.00

HO-116

Refrigeration unit 2. As HO-115 but supplied with two heat exchange units to model a higher capacity unit. The finished model measures 58mm x 25mm x 23mm.

£3.20

HO-116P

Refrigeration unit 2. As above but ready assembled and painted.

£5.00

HO-120

Building front 7. A low-relief model of a larger modern industrial unit with a pressed-metal upper with a pitched roof and a 6.5mm deep block lower wall. A 40mm wide by 54mm high vehicle entry door is cast into the model 19mm from the right-hand edge. The unit is 151.5mm high to the ridge, 124mm to the eaves, and 151mm wide. The model can be extended by addition of our HO-097, HO-098, HO-121, or HO-122 castings. Additional doors can be added with our HO-096 or OO-096 models.

£5.50

HO-121

Building front 8. A low relief model with a single slope roof which has been designed to be used to extend our HO-093 or HO-120 models to the left, as viewed, but which can also be used alone or with HO-098 or HO-122. A 6.5mm deep block lower wall is incorporated in the casting, as is a centrally positioned personnel door. The model is 72mm wide 124mm high at the highest point and 100mm high to the eaves.

£3.50

HO-122

Building front 9. As above but with the roof sloping the opposite way to extend HO-093 or HO-120 to the right as viewed.

£3.50

HO-123

Deep wall for HO-093. A 50mm deep block wall section to replace the 6.5mm deep section provided with HO-093, thus creating a taller structure.

£2.50

HO-124

Deep wall for HO-097. A 50mm deep block wall section to replace the 6.5mm deep section provided with HO-097, thus creating a taller structure.

£1.50

HO-125

Deep wall for HO-098. A 50mm deep block wall section to replace the 6.5mm deep section provided with HO-098, thus creating a taller structure.

£1.50

HO-127

Plain wall - stucco. A 50mm deep wall section with a stucco-like textured finish, for use with our HO-093 or HO-094 sections or as an aid to scratchbuilding.

£2.50

HO-128

Office wall - stucco. A 50mm deep wall section with a stucco-like textured finish and door and window detail, for use with our HO-093 or HO-094 sections or as an aid to scratchbuilding.

£1.50

HO-129

Warehouse wall - stucco. A 50mm deep wall section with a stucco-like textured finish and a row of high level windows, for use with our HO-093 or HO-094 sections or as an aid to scratchbuilding.

£1.50

HO-130P

Brazier. A model of an empty oil drum brazier (Suitably battered and weathered) supplied ready painted.

£2.50

HO-131

35T Hopper Load. A casting representing a mineral load for a 35T hopper car. The casting is supplied unpainted and measures 103mm long by 30mm wide.

£2.00

HO-131P

35T Hopper Load. A ready painted casting representing a coal load for a 35T hopper car. The casting is 103mm long by 30mm wide.

£2.50

HO-132

Building Front 10. A low-relief model of a modern industrial unit having a block lower wall and pressed-metal upper with a pitched roof. The model is 92mm wide by 80mm high and 5mm deep. The casting is supplied unpainted.

£3.00

HO-133

Building Front 11. A low-relief model of a modern industrial unit of pressed-metal with a pitched roof. The model is 92mm wide by 80mm high and 5mm deep. The casting is supplied unpainted.

£3.00

HO-134

Building side 5-170. A single casting building side to match the above measuring 170mm long and having a rebate along the top edge to take roofing material (See HO-135). The casting is supplied unpainted.

£3.00

HO-135

Roof panels 5-170. Two roof panels for use with two of the above and two HO-133s to make a complete building. Doors may be added using HO-096 castings. The castings are supplied unpainted.

£3.00

HO-140

Modular chimney base 1. A 20mm square, 23mm high, brick base with maintenance door. This is the first for our new modular chimney range.

£2.00

HO-150

Modular chimney stack 1. A 143mm high, brick chimney stack which tapers from a 16mm square top to an 18mm square base. It can be used with our modular chimney bases and caps, or alone.

£4.00

HO-160

Modular chimney cap 1. A simple, stepped, 17mm square by 7mm deep, brick and stone cap for our modular chimney stacks.

£1.00

HO-170P

Brick chimney 1. A ready assembled and painted combination of our modular chimney base 1, stack 1 and cap 1.

£11.00

HO-171

Brick chimney 2 stack. A tall (Approx 280mm) model of a brick built, circular, tapering chimney. The base is 26mm diameter and the top 22mm diameter. Supplied unpainted. The model can be used on its own or with either, or both, of the chimney bases HO-172 and HO-173.

£15.00

HO-172

Brick chimney 2 base A. A D-cross-sectioned base for our HO-171 brick chimney model. The base is 32mm wide and 40mm high and approx 38mm front to back. Supplied unpainted. Can be used with our HO-173 model to provide even greater height to the chimney.

£4.00

HO-173

Brick chimney 2 base B. A cylindrical cross-sectioned base for our HO-171 brick chimney model. The base is approx 30mm diameter and 42mm high. Supplied unpainted. Can be used with our HO-172 model to provide even greater height to the chimney.

£3.00

HO-174P

Brick chimney 2. A ready made and painted model of our HO-171 Brick chimney complete with bases A (HO-172) and B (HO-173) giving a total height of approx 368mm.

£30.00

HO-180

Clutter 1. A small casting of yard clutter (Bits of metal, ducting, springs, seals, etc.) to add detail to your scenes. Supplied unpainted. The model is approximately an inch across.

£1.50

HO-180P

Clutter 1. A small casting of yard clutter (Bits of metal, ducting, springs, seals, etc.) to add detail to your scenes. Supplied ready painted. The model is approximately an inch across.

£2.25