This category contains models produced to a scale of 3.5mm:1 foot. Many are scenic/building detailing pieces that can be used in many of the other scales featured on our site. When considering them, please think of the effect you wish to achieve rather than the scale. If in doubt, email us for advice.
HO-scale: A 50mm deep wall section with a stucco-like textured finish and door and window detail, for use with our HO-093 or HO-094 sections or as an aid to scratchbuilding.
HO-scale: A 50mm deep wall section with a stucco-like textured finish and a row of high level windows, for use with our HO-093 or HO-094 sections or as an aid to scratchbuilding.
HO-scale: A casting representing a mineral load for a 35T hopper car. The casting is supplied unpainted and measures 103mm long by 30mm wide.
HO-scale: A ready painted casting representing a coal load for a 35T hopper car. The casting is 103mm long by 30mm wide.
HO-scale: A low-relief model of a modern industrial unit having a block lower wall and pressed-metal upper with a pitched roof.
HO-140: Unpainted, industrial, brick chimney base with inspection door. The first in our modular chimney range.
HO-150: Unpainted, 143mm high, square brick industrial chimney stack. The first in our modular chimnies range.
HO-160: Unpainted, square, brick and stone industrial chinmey cap. The first in our modular chimnies range.
Brick chimney 1. A ready assembled and painted combination of our modular chimney base 1, stack 1, and cap 1.
HO-171: A tall (Approx 280mm) model of a brick built, circular, tapering chimney. Supplied unpainted. The model can be used on its own or with either, or both, of the chimney bases HO-172 and HO-173.
HO-172: A D-cross-sectioned base for our HO-171 brick chimney model. The base is 32mm wide and 40mm high and approx 38mm front to back. Supplied unpainted. Can be used with our HO-173 model to provide even greater height to the chimney.
HO-173: A cylindrical cross-sectioned base for our HO-171 brick chimney model. The base is approx 30mm diameter and 42mm high. Supplied unpainted. Can be used with our HO-172 model to provide even greater height to the chimney.
HO-174P: A ready made and painted model of our HO-171 Brick chimney complete with bases A (HO-172) and B (HO-173) giving a total height of approx 368mm.
HO-scale: A small casting of yard clutter (Bits of metal, ducting, springs, seals, etc.) to add detail to your scenes. Supplied unpainted.
HO-scale: A small casting of yard clutter (Bits of metal, ducting, springs, seals, etc.) to add detail to your scenes. Supplied ready painted.